For metallic, pearls or high gloss the Sagola 4500 is one of the best guns on the market
The 4500 has a revolutionary air distribution system.
Machined so well there are no soft parts between air and liquids.
New aluminum air caps for high solids and waterborne paints. When using the 4500 the maximum recommended air pressure of 29 PSI this gun will use different amount of air based on which air cap you have ordered.
This gun comes with a 600ml plastic cup, wrench and brush.
Fluid tip and Air Cap usage
For clear and single stage Sagola recommends a 1.3XL with the LXT Clear Cap
If the clear or single stage paint is a little heavier the 1.4 with the LXT Clear Cap may be best.
Waterbased and waterborne paint products are sprayed using the Aqua air cap.
The HVLP air cap is mostly used for spraying solvent base coats.
The LXT01 is a multipurpose air cap.
Air Consumption
The air consumption (CFM) can be reduced if you lower the inlet pressure but at 29 PSI the air usage is as follows
With the HVLP Air cap this gun will use approximately 14 CFM of air
With the Clear Coat cap it will use approximately 11 CFM
With the Aqua cap it will use approximately 9 CFM
With the LXT01 cap it will use approximately 9 CFM
SAGOLA 4500 XTREME UNBOXING devilbiss compact compressor | |
| 38 Likes | 38 Dislikes |
| 10,633 views views | 33.5K followers |
| Cars & Vehicles | Upload TimePublished on 6 Jun 2015 |
Không có nhận xét nào:
Đăng nhận xét